o - ring seal造句

• Tubeless clamp in tyre valves with o-ring seal
  轮胎气门带o形密封圈中无内胎卡箍
• Railway traction and rolling stock . plugs with o-ring seal
  铁路车辆.带形密封圈的塞子
• The o-ring seal material shall be manufactured from epdm
  形环密封材料应该由三元乙丙橡胶制造。
• An o-ring seals the relief valve body to the main housing
  用一个o形环密封安全阀阀体与主外壳。
• Rubber mixture of o-ring seals for fuel
  燃油用o形橡胶密封圈材料
• Railway traction and rolling stock . pipework connections on devices fitted with o-ring seal plugs . interfaces
  铁路牵引车和铁路车辆.装有形密封插塞的管路的连接件.接口
• Registered machine fits and positive sealing o-ring seals at all joints; easy replacement
  在所有连接点均配置拥有专利保护的机械式适合的、积极的o型密封垫圈，更换简便易行。
• Start stem o-ring seal over stem, then press into position as handle is pressed down over stem
  从阀杆上的阀杆o形环密封开始，然后在手柄安装在阀杆上后，将其压进手柄的位置上。
• Ports and stud ends with iso 261 threads and o-ring sealing-part 2 : heavy duty s series stud ends-dimensions, design, test methods and requirements iso 6149-2 : 1993
  带iso261螺纹和o型圈密封的油口和螺柱端头.第2部分
• Connections for fluid power and general use-ports and stud ends with iso 261 threads and o-ring sealing-part 1 : ports with o-ring seal in truncated housing iso 6149-1 : 1993
  液压传动连接和普通连接.油口和带iso261螺纹和o型环
• Connections for fluid power and general use-ports and stud ends with iso 261 threads and o-ring sealing-part 1 : ports with o-ring seal in truncated housing iso 6149-1 : 1993
  液压传动连接和普通连接.油口和带iso261螺纹和o型环
• Inspect all parts for wear and replace as necessary . if the valve has been leaking, it is suggested that the seat and the o-ring seals be replaced
  检查所有部件是否磨损，是否需要更换。如果阀门已经泄漏，建议更换阀座和o形环密封。
• The modern modular construction system with an o-ring sealing system, tried and tested for many years, ensures a high level of functional safety and a long service life
  现代的模块化构建系统采用了o型圈密封，经过了多年的使用和测试，可以保证高度的安全和长使用寿命
• Connections for fluid power and general use . ports and stud ends with iso 261 threads and o-ring sealing . part 1 : ports with o-ring seal in truncated housing
  流体动力和一般用途的连接件.具有iso261螺纹和0型环密封的孔口和螺柱端头.第1部分:截顶汽缸体内带有o形环的孔口
• Connections for fluid power and general use . ports and stud ends with iso 261 threads and o-ring sealing . part 1 : ports with o-ring seal in truncated housing
  流体动力和一般用途的连接件.具有iso261螺纹和0型环密封的孔口和螺柱端头.第1部分:截顶汽缸体内带有o形环的孔口
• Remove the two check modules by pressing firmly from the outlet end ( end with wrench pads ) . o-ring seals will be removed with the removal of modules from the body
  从出口端（带有板钳基座的端口）稳稳地压下，拆卸两个止回模块。o形环密封将随着模块的拆卸从阀体上拆卸下来。
• L . connections for fluid power and general use-ports and stud ends with iso 261 threads and o-rings sealing-part 3 : light-duty l series stud ends-dimensions, design, test methods, and requirements
  液压传动和通用连接.带iso261螺纹和o形密封圈的孔及螺柱端.第3部分:轻型
• Connections for general use and fluid power-ports and stud ends with iso 725 threads and o-ring sealing-part 1 : ports with o-ring seal in truncated housing
  一般用途的和流体动力用接头.带iso261螺纹和o形环密封件的端口和螺柱端头.第1部分:在截断外壳体内装有o形密封件的端口
• Connections for general use and fluid power-ports and stud ends with iso 725 threads and o-ring sealing-part 1 : ports with o-ring seal in truncated housing
  一般用途的和流体动力用接头.带iso261螺纹和o形环密封件的端口和螺柱端头.第1部分:在截断外壳体内装有o形密封件的端口
• Connections for fluid power and general use-ports and stud ends with iso 261 threads and o-ring sealing-part 1 : ports with o-ring seal in truncated housing
  流体动力用和通用的连接件.带iso261螺纹和o形环密封件的端口和螺柱端头.第1部分:截断平头壳体内带有o形环密封件的端口